4 Profile - Belt Head Sander
SD-0604P |
 SD-0604P
|
Features Include:
- Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
- Work piece is through feed with conveyor and spring load pressure rolls at top, without sliding.
- Four sanding head to cover all the three side profile sanding.
- Sanding head can be adjusted forward & backward, up & down and tilt ? 45 to + 90 degrees.
- Variable sanding belt speeds 0 ~ 3600 RPM for the best finish result.
- Automatic control jumping sanding head stroke design for not round over the front and end of material.
- Variable feeding conveyor 10? to 136? to get different setup easily.
- Sanding belt tension mechanism is self balance designed, it maintains proper tension at all the time, that not only provides steady belt pressure but extends belt service life.
- Constant sanding pressure is pneumatic cylinder controlled to achieve uniform and superior finish.
- Air blower actives clean and cool down the sanding belt.
- Extra sanding head can be use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
|
|
|
SPECIFICATIONS
|
|
|
Wheel, Belt Head
|
|
|
Brush Wheel Drive Motor
|
2 HP
|
|
Brush Tilts
|
+90° ~ 180°
|
|
Sanding Belt
|
3" x 20"
|
|
Sanding Wheel Dia. Max
|
8"
|
|
Sanding Spindle Dia.
|
1"
|
|
Spindle Speed
|
0 ~ 3600 RPM
|
|
Profile Platen Belt Head
|
|
|
Range of Workpiece Width
|
2" ~ 70"
|
|
Minimum Length of Workpiece
|
4"
|
|
Range of Workpiece Thickness
|
1/6" ~ 4"
|
|
Sanding Belt Width
|
1" ~ 4"
|
|
Sanding Belt Length
|
98"
|
|
Belt Tilts
|
-45° ~ +90°
|
|
Belt Drive Motor
|
2 HP
|
|
Sanding Belt Speed
|
0 ~ 2400 FPM
|
|
Profile Head Stroke
|
0 ~ 3"
|
|
Sanding Pressure
|
1 ~ 5 LBS
|
| |
|
|
| $33,900 |
|
|
|
Add To Proposal: Adds the above product to a proposal list.
Request Proposal: Compiles all products that were "Add to Proposal" and sends user to a "Request Information" form.
|
